DIN-RAIL EDMX (ENTTEC)
Often referred to as the ‘OCTO Mk2’(as the successor to ENTTEC’s original ‘PIXEL OCTO’ DIN-rail LED controller), the OCTO is a little box that packs a huge punch.
An 8-Universe, dual-output eDMX to LED pixel data converter, the OCTO is a robust and reliable installation-grade device.
This smart controller connects directly to your LED lights, and is engineered to take any architectural, commercial, or entertainment project to the next level.
Designed with ultra-fast deployment of LED strips and pixel dot systems in mind, the OCTO has eDMX support for Art-Net, sACN , ESP and KiNet data, and is compatible with almost every SPI LED strip due to custom protocols and an industry-leading voltage input range.
With its easy-to-use localhost web interface, create gradient effects effortlessly via the inbuilt FX engine. Run them as standalone shows on power-up, eliminating the need for a DMX source. Or, if you need to control more than 4 universes of LEDs per port, the OCTO’s automatic Overdrive Mode will boost your output up to 16 universes in total.
Its installer-friendly features include network chaining, custom output protocols, plus an identify button to check correct wiring without a data source. What’s more, with flexible TS35 DIN rail or surface mount options to choose from, the OCTO is the ultimate go-to LED pixel control device for almost any scenario.
Technical specifications
Input voltage 4-60V DC (via 2-pin Phoenix or direct from LEDs via SPI ports)
Max. power draw 5W
Max. output voltage 5V
Max. output current 50mA
Max. heat dissipation 4.5W
Cooling method convection
Operating temperature -20°C to 50°C /-4°F to 122°F
Operating humidity 5 to 95% (non-condensing)
Data input eDMX (Art-Net, sACN, ESP or KiNet protocols) via 2 x RJ45 ports
Data output SPI/NZR protocols (customisable) via 2 x 4-pin Phoenix ports
Max. eDMX -> pixel conversion per device 16 universes (8,192 channels)
Max. pixels controllable per device 1360 x RGB (680 per port) / 1024 x RGBW (512 per port)
Network speed 10/100Base-T
Network discovery ENTTEC EMU software
Network configuration static (default 192.168.0.10) / DHCP
Recommended network device quantity per chain up to 8 devices
for optimum synchronisation between outputs
Body material ABS plastic
IP rating IP20
LED indicators forward-facing status LED plus network link/activity (integrated into RJ45 ports)
Mounting options surface & TS35 DIN Rail mount
Unit dimensions 100.5mm x 72.25mm x 34mm
Unit weight 0.11kg / 0.24lbs
Shipping dimensions 160mm x 140mm x 40mm
Shipping weight 0.18kg / 0.39lbs
Compliance CE / WEEE (EU), UKCA (UK), RCM (Aus/NZ), UL / FCC (USA), UL (Canada)
